In the UK, all new Rifles, Air-Rifles and Air-Pistols must be bought face to with a registered Firearms Dealer, if you wish to purchase any of the above you will need to provide us with information of who and where it is to be sent, once contact has been made with the RFD and they have agreed to accept the item for you we can begin to arrange the delivery. Please note, there is usually a £25 handling fee for this service. Any licencing needs such as entering details to a firearms licence will need to be done before the firearm is sent out. Your licence will need to be sent in to us using our registered office address, shown on your invoice.
£210.00
Replacement or additional compressed air cylinder for the Feinwerkbau Air-Pistol, available in long or short variants, please use the drop down menu to pick your length and color.
The threads on the Feinwerkbau pre charge cylinders are the same so regardless of if you have a P8X, P44, P11 etc, these will all work just fine. The only thing to consider is if you have the short version pistol, the full length or “long” cylinder will protrude beyond the end of the barrel. Fitting a shorter cylinder is a great way of reducing the weight and bringing the centre of gravity towards your hand.
General information on Feinwerkbau compressed air tanks.
The compressed air tanks from FEINWERKBAU fall under the Pressure Tank Ordinance, but do not require approval
(e.g. by TÜV, etc.). The manufacturer must ensure the safety of the compressed air tanks.
For this reason, the service life of the compressed air cylinder has been limited to 10 years. After that, they must be disposed of safely
become. If the compressed air tanks are to be used for a period longer than 10 years, FEINWERKBAU
safety can no longer be guaranteed.
The compressed air tanks are made of a special, very high-quality aluminum alloy.
Nevertheless, the material is subject to an aging process, i.e. it can become brittle under certain circumstances. The high loads
due to the filling pressure of 200 bar (for comparison: a car tire is filled to approx. 3 bar), as well as the alternating load between
The full and empty state of the container can lead to the material structure being subjected to the stresses of a
service life of more than 10 years has not increased.
An often mentioned overhaul or “TÜV test” is not possible to extend the service life of a compressed air tank
to extend.
All compressed air tanks produced by FEINWERKBAU are either supplied with a batch number and/or a date of manufacture (see illustration).

In general, that
• Gun air tanks since 1996 with quarter and year of manufacture
and the
• Rifle air tanks since 1997 are also marked with the quarter and year of manufacture.
Thus, all FEINWERKBAU compressed air tanks in use today should show a date of manufacture, otherwise
if they are more than 10 years old and can no longer be used.
FEINWERKBAU points out that as early as 1996 in the operating instructions for the compressed air rifle model P70
an inspection of the compressed air tanks was prescribed after 5 years. This deadline was set by FEINWERKBAU
10 years extended – after this useful life the container should be disposed of safely.
Many customers ask whether there are material problems at FEINWERKBAU in relation to the compressed air tank material or
passed. We can assure you that we have not had any material problems to date.
We draw your attention to the fact that these points must be observed.
FEINWERKBAU rejects all recourse claims arising from non-observance of the aforementioned
message arise, back.
| Colour | Silver, Red, Lacquered Silver |
|---|---|
| Length | Standard, Short |
© 2023 All rights reserver. Lacey's Shooting Services. Powered by GFD
In the UK, all new Rifles, Air-Rifles and Air-Pistols must be bought face to with a registered Firearms Dealer, if you wish to purchase any of the above you will need to provide us with information of who and where it is to be sent, once contact has been made with the RFD and they have agreed to accept the item for you we can begin to arrange the delivery. Please note, there is usually a £25 handling fee for this service. Any licencing needs such as entering details to a firearms licence will need to be done before the firearm is sent out. Your licence will need to be sent in to us using our registered office address, shown on your invoice.